Measurement and correction tools for milling

 

All that is said about the measurement and correction tools for turning, milling and worth. When milling is the process of measuring something much simpler, because only the height of the blade tool axis Z to the tool reference point F (N). Data on measured tools are entered into the database under the Parameters / Tooloffset. Layout and description of the function keys for Tooloffset are on page X.
The planned work must be selected and the necessary tools in the database tools you need to enter the required dimensions.
Forehead tools I have from the reference point of tool holders N distance for the length of the + Z and thus gets Corrective point P. (picture) The tool is defined and its radius R.
The values of length Z and radius R are entered into the database for the selected tool T (picture) under the parameter, Tool offset.

The direction of the length correction L1
Direction correction tools depends on the active plane milling G17-G19. G17 - the main application for vertical milling (Mill 55, Mill105 ..)
L1 - the Z axis
R - XY
G18 - the main application for horizontal milling machines and when using the angled head
L1 - the Y axis
R - the ZX plane
G19 - Work with angled head
L1 - the X-axis
R - in the YZ plane

Render in 0.2991 sec.