Web site cnctechnic.com
Total votes: 30

New Messages

Dimitrios Sideris

hello we have an S400 cnc and it seems to have a 200 micron backlash. i.e. when you move it in one direction and then to the oposite direction the driver moves by 200 micron before the head starts moving again. is that something that can be corrected?


Best web site


This is definitely one of the most complete sites for cnc machines


Very nice.


This is great, here I find all the information on cnc machines

Testing CNC machine - DRY RUN mode

Posted by on 25 Dec 2011 2:43 Programming CNC milling machine
After the graphic simulation where we check the correctness of the print program, we must test the program in Dry Run mode, ie without the workpiece with reduced feed and no rotation of the spindle. These tests check:
- whether the neutral point (W) is configured correctly - G54
- whether the tools are well chosen and measured
- whether to change the tool going far enough from the work
1. select the AUTO mode
2. choose the appropriate program (program number)
3. Dry run mode to include
4. SBL include (Single Block) mode
5. Switch the feed to put on a zero
6. start with the first block of
7. switch to switch to a small feed (switch back to 0, we can avoid a critical situation
8. start with the following block and repeatedly control the progress of tools for
This test largely avoids the possible errors and serious damage to the machine or tool in the event of a crash.

Post a comment

Code Enter code from the image above




Actual comments

The work on the machine, program selection, control programs
Well I guess I don't have to spend the wekneed figuring this one out!
Measurement and correction tools for milling
Absolutely first rate and copper-boottmed, gentlemen!
Robot Bending Machines
You've really ipmresesd me with that answer!

Download spots avi |

All rights reserved.